We pride ourselves on the the fact that our service at Laserline.fit is completely tailor made.
The moment you engage with our team, you will quickly realise that your in safe hands.
Listed below are the actions we take into account for every installation.
Reading the Plans.
-
Find and review the plans and any other drawings used to prepare your order. Pay particular attention to any units that have special features or will be positioned unusually.
Preparation.
-
Before starting any assembly, spend some time preparing the area where the units will be fitted.
-
To help your project run smoothly, make sure you’ve checked the measurements and dimensions
before you start work. -
After checking that all the units ordered have been delivered, the area should be stripped out and any
obstructions such as old skirting, disused pipes, tiles etc. removed. -
It is not advisable to fit timber doors in newly constructed or recently plastered rooms. High moisture
content in the environment may cause the doors to swell and split. -
Don’t store the products in an unsuitable place or on hard surfaces such as concrete etc. as they may
get damaged. -
To get long term use and performance from any kitchen products, make sure the kitchen is installed
as per these guidelines. -
Protect the finish on panels by laying them on the floor and using the packaging to prevent scratches.
-
Do not over tighten screws and be particularly careful when using power screwdrivers.
-
Make sure that all the parts and hardware have been enclosed. Contact our Customer Services
department if there is anything missing or damaged. -
All are supplied flatpack to ensure they reach you in the best possible condition. It is recommended
that the larger units are built in the room they are to be installed as it may not be possible to move them into the room once they have been assembled.
Services.
-
If you wish to fit or move any electric, gas or water points, now is the time to do this. If in doubt or unsure, seek advice from a qualified profressional.
-
Services to appliances should be to the manufacturer’s specification and fitted by a qualified person. •If unsure of any part of your design or layout, then please contact your Design Consultant at your local
store.
For more information click on one of the links below from the Laserline.fit website or contact us directly here to discuss your next steps.
